Skip to content

DEMO SCALE

CHIPPER

  • Residual woody biomass
  • Biomass in moisture range up to 50%
  • Power: 22 kW
  • Production capacity: depending on the material characteristics and screen used (nominal 3,000 kg/h; actual 500 kg/h)
  • Blade rotor
  • Equipped with interchangeable screens, from 10 to 30 mm

CHOPPER

  • Herbaceous biomass
  • Biomass in moisture range up to 50%
  • Power: 55 kW
  • Production capacity: depending on the material characteristics and screen used (nominal 3,000 kg/h; actual 500 kg/h)
  • Hammer rotor
  • Equipped with interchangeable screens, from 20 to 60 mm

ROTARY DRYER

  • Rotary drum dryer
  • All types of biomass: herbaceous and woody
  • Biomass in the moisture range up to 50%
  • Power: 2.2 kW + 2.2 kW (2 motors)
  • Production capacity: 500 kg/h
  • Feed flow control and drying temperature (up to 300ºC)
  • Vacuum system and fine dust collection

HAMMER MILL

  • All types of biomass: herbaceous and woody
  • Moisture up to 15-20%
  • Power: 30 kW
  • Production capacity: depending on the material characteristics and screen used (nominal 3,000 kg/h; actual 500 kg/h)
  • Hammer rotor
  • Equipped with interchangeable screens, from 3 to 12 mm

DISC MILL

  • All types of biomass: herbaceous and woody
  • Moisture up to 15-20%
  • Power: 7.5 kW
  • Production capacity: depending on the material characteristics and screen used (nominal 3,000 kg/h; actual 500 kg/h)
  • 2-disk system, for refining previously ground biomass
  • Maximum particle size at the inlet: 12 mm

VIBRATING SIEVE

  • All types of biomass: herbaceous and woody
  • Separation operations for bulk solids and solid/liquid mixtures
  • Any moisture range
  • Power: 0.35 kW
  • Inlet flow rate up to 1 m³/h (depending on materials)
  • Vibrating sieve table, with separation up to 5 levels
  • Equipped with interchangeable screens, from 0.5 to 15 mm

BENCH SCALE

SHREDDER

  • All types of biomass: herbaceous and woody
  • Biomass in the moisture range up to 50%
  • Power: 7 kW
  • Production capacity: up to 50 kg/h (depending on materials)
  • Blade rotor
  • Maximum inlet dimensions: diameters up to 80 mm
  • Manual feeding

RIPPER SHREDDER

  • All types of solid biomass and solid/liquid mixtures
  • Any moisture range
  • Power: 2.2 kW
  • Production capacity: up to 50 kg/h (depending on materials)
  • Two-shaft shredder, equipped with CRMB steel Blades
  • Maximum outlet dimensions: 5 mm
  • Manual feeding

KNIFE MILL

  • All types of biomass: herbaceous and woody
  • Moisture up to 15-20%
  • Power: 3 kW
  • Production capacity: depending on the material characteristics and screen used (up to 10 kg/h)
  • Blade rotor, with adjustable rotation speed
  • Equipped with interchangeable screens, from 0.5 to 4 mm
  • Manual feeding

FOLLOW US

© National Renewable Energy Centre (CENER) · Ciudad de la Innovación, nº 7 · 31621 Sarriguren (Navarra) · Spain
T + 34 948 25 28 00 · F + 34 948 27 07 74 · info@cener.com